M6 - 6,500 BTU Self Contained Boat Air Conditioner.
Our M6 Boat air conditioner is available in right, left or top air discharge and is now available as a cool reverse cycle heat unit. We use 4” ducting and recommend a minimum of 2- 4” round supply grills with this installation. This unit will run off the new Honda eu1000i 1,000 watt portable generator, while in cool mode. Another option is to use a Statpower 1,000 Watt Inverter and 450 amp hours of battery power and you can anchor out (on average) for one night. The electric heat option generates 5,640 BTU of heat. Electric heat option is not available in 220 volt. Designed to cool 550 cubic feet. Unit Measures: L-16" W-11.5" H-11.5" (Left and Top Discharge, add 1" in length) Weight 45 lbs.
On average, This boat air conditioner is designed to cool a cruiser up to 27' and up to 30' sailboats.
Running amperage: Cool = 6.4amps, E/H = 17.5amps, R/C = 7.5amps. Add one amp for the standard seawater pump. Start up amperage is calculated by running amperage multiplied by 1.8.
DIGITAL PROGRAMMABLE THERMOSTAT WITH 20' OF CABLE, REMOTE MOUNT ELECTRIC BOX, 5 YEAR WARRANTY AND RUBBER MOUNTING PAD INCLUDED. 4" DUCT TRANSITION COLLAR INCLUDED.
To determine supply air discharge, You must be looking at the Front of the unit. The Front of the unit is the evaporator. (The evaporator with the stainless steel drain pan under it.) Now you can determine your ducting supply air requirements to the Right, Left or Top.
Call 813-671-5719 For Wayne Wright - Not Automated.Most Customers Do Have a Few Questions , That Is Why Most Customers Call To Place An Order. You Can Also Order Online. (You do Not need a paypal account to order online.)
MERMAID MARINE AIR - INTERNET PRICING 115V COOL ONLY $1555.00
REVERSE CYCLE HEAT INTERNET PRICE $1719.00
We have re-designed our control box to include a protected circuit board to ensure it is moisture and vibration protected. It is smaller in size than the standard control box previously provided and will have four mounting locations with rubber feet to prevent any disturbance while underway. The display panel will work on a "phone cord" concept. The Mermaid unit will still have the 4 foot "pig-tail" harness for ease of installation and remote mounting the electrical control box. The standard thermostat cable length is 15 feet.
User friendly 4 button display panel requires no manual for basic operation. Automatic fan speed reduction as set point is approached. Six  programmable manual fan speeds. AC voltmeter to protect valuable electrical components. Away Mode for controlling relative humidity. Many More Programmable Options.
$225 with new unit purchase.
STD Installation kit including Foot scoop, seacock, water strainer, Dual ducting kit, and electrical connection kit is an additional $495.00 WITH FREE SHIPPING IF ORDERED WITH A UNIT. Std. Installation Kit Parts.
(1)5/8" plastic discharge thru hull; (6)ft ½" clear hose; (30)ft 5/8" blue trace hose; (3)ft ¾" red trace hose; (8)#12 SS hose clamps; (12)#8 SS hose clamps; (12) #8 ½" SS mount screws; (4) #14 2" SS mount screws; (20) 14" tie straps; (1) bronze foot scoop w/screws; (1) ¾" bronze seacock; (1) ¾" closed bronze nipple; (1) ½" bleed off valve; (1) ¾" PVC thread-to-hose elbow; (1) ¾" small water strainer; (1) 4 x 4 x 4 Plastic wye; (1) PG white Plastic 10 x 10 return air grill with filter; (12.5)ft 4" non-insulated duct; (2) 4" round white plastic supply air grills; (1) standard marine circuit breaker; (20)ft 12/3 gauge boat power cable; (20)ft 16/3 gauge pump power cable.
SEA WATER PUMPS ARE NOT INCLUDED IN KITS AND MUST BE ORDERED SEPARETLY - CLICK THIS LINK TO ORDER PUMPS Accessories
Mermaid's Digital Programmable Thermostat is provided standard with each Mermaid Marine Air conditioning unit. The thermostat is also accompanied with 20 feet of four-wire thermostat cable and installation instructions.The Programmable features allow for weekday and weekend setting for those boater's who care to use the unit for dehumidification or simply climate control while not on board.